Storz & Bickel Filling Chamber Housing Only
For Volcano Digital, Classic & Easy Valve
The Volcano Vaporizer’s Easy Valve Filling Chamber Housing is an inexpensive but vital component of the vaporizer that slips seamlessly onto the Volcano’s exhaust vent. It’s designed to hold the stainless steel filling chamber and the Easy Valve through which the Volcano Vaporizer’s hot air stream passes into the balloon.
The Easy Valve Filling Chamber Housing is a durable product manufactured from high-quality polymers and made to exacting tolerances to prevent vapour loss.
(The housing does not include the internal stainless steel components or the filling chamber clips).
In The Box
-  x Filling Chamber Housing
-  x Filling Chamber Cap Housing
- 1x 120ml/min, 4fl oz/min peristaltic pump for dosing pH adjuster solutions
- 2x 120ml/min, 4fl oz/min peristaltic pumps for dosing nutrient stock solutions
- Rugged wall mount design
- Individual pump priming and calibration
- Replaceable peristaltic pumps and tubing
- 4 metres / 13 feet of acid / alkaline resistant food grade tubing for dosing pH correction solution
- 3x 4 metres / 13 feet of food grade tubing for dosing nutrient stock solution
- Compatible with most modern growing systems including recirculating and drain to waste systems
- Compatible with Bluelab® Pro Controller™ and Bluelab® Dosetronic™ models1
STORZ & BICKEL GmbH guarantees end customers (hereinafter referred to as “Customer”) in accordance with the following provisions that the product (MIGHTY+, CRAFTY+, VOLCANO HYBRID, VOLCANO CLASSIC, PLENTY) that has been delivered to the customer is free from defects in material, of manufacturing or construction faults within the time period of three (3) years (MIGHTY = two (2) years) from the date of delivery (warranty period).
STORZ & BICKEL GmbH shall remedy any defect or fault claimed under the aforementioned warranty at its sole discretion and own cost by repair, replacement with new or refurbished individual parts or delivery of a defect-free product of the same kind and type.
The warranty does not include parts that are particularly affected by wear and tear, such as in particular Batteries, Balloons, Cooling Units, Charging Cables and Adapters, Filling Chamber (VOLCANO), Tube, Screens, Dosing Capsule and accessories included with the products, e.g., Herb Mill, Filling Aid, Brush, etc.
Any other customer claims against STORZ & BICKEL GmbH, especially for compensation are excluded.
However, the contractual or statutory rights of the customer against STORZ & BICKEL GmbH under this purchase agreement shall not be affected by this warranty.
Accordingly, regardless of this warranty, STORZ & BICKEL GmbH is liable for defects as to quality or title for delivery items pursuant to the applicable statutory provisions, in particular Sections 434 ff. BGB (German Civil Code).
The period of limitation for statutory claims for defects is twenty-four (24) months and shall begin when the products are delivered.
Claims under this warranty can only be asserted if
- the product is not damaged and does not show signs of wear and tear that was caused by use deviating from the normal intended purpose and specifications of STORZ & BICKEL GmbH (according to the Instructions for Use),
- the product does not show signs of repairs or other interventions that were caused by third parties not authorized by STORZ & BICKEL GmbH,
- only accessories authorized by STORZ & BICKEL GmbH have been installed in the product and
- the serial number has not been removed or made unrecognizable.
Claims under this warranty can only be asserted if the customer registers the product within one year of the delivery at www.storz-bickel.com/registration. Warranty claims shall be voided if the product has not been registered within one year. Warranty claims must be asserted against STORZ & BICKEL GmbH by presenting the original invoice, showing the purchase date, within the term of exclusion of two months after the warranty case occurred or in the case of defects/faults that were not immediately detectable, within two months after their detection.
- STORZ & BICKEL GmbH shall assume the costs for sending and returning the product.
- Any customs duties and public charges must be paid by the customer.
- This shall not apply if the customer was unable to detect that a warranty claim was unjustified.
This warranty shall also apply to the aforementioned extent and under the aforementioned prerequisites (including product registration and presenting the original invoice or product registration and presenting proof of purchase in the case of resale) for any subsequent future owners who are residing in the area of validity if they register the product. If the product has already been registered, new registration by a subsequent future owner is not possible in the case of a resale, thus voiding any possible claim under the warranty.