Passive Unit Kit 180 g Mark II

• 180 g Material Column w/ De-Wax Column x1
• 3’’ Top Plate Assembly w/ Shower Head and ¼’’ MNPT Pressure Gauge, Pressure Relief Valve, Ball Valve w/ ¼’’ MJIC
• BHO Filter Stack 3’’- 1.5’’ Reducer Bowl x1
• 6’’ High-Pressure Clamp x2
• 3’’ High-Pressure Clamp x2
• 5’’ High-Pressure Clamp x3
• 5’’ Tri-Clamp 3 Piece Ball Valve x1
• 5’’ Viton Meshed Gasket 150 mesh
• 3’’ Viton Rubber Gasket x2
• 6’’ Viton Rubber Gasket x3
• 5’’ Viton Rubber Gasket x1
• 6’’ Hemispherical Dome with 1.5’’ Sight Glass x2
• 6 x 3’’ Jacketed Splatter Platter w/ 3/8’’ FNPT Ports x1
• 6 x 12’’ Material Collection Spool x1
• 6 x 24’’ Welded Base Gas Collection Column x1
• ¼” Nylok Ball Valves with ¼” MJIC Fittings x5
• 2 m ¼’’ FJIC PTFE Stainless Steel Braided Hose x2
• 150 psi Pressure Gauge ¼’’ MNPT x2

This Kit includes:

• Pressure Relief Valve Brass 1/4" NPT Sterilized
• 1.5" High-Pressure Sanitary Clamp
• 3" High-Pressure Sanitary Clamp
• 3"-1.5" Reducer Bowl with BHO Filter Plate & Compressor Ring
• FITOK JIC Male Connector - 1/4 x 1/4 NPT For Closed-Loop Units
• 3" End Cap with Shower Head - 1/4" MNPT
• Passive Unit Kit Mark II (No Column)
• 1.5" Viton Rubber Mesh Screen Gasket 150 micron
• 180 g Stainless Steel (De-wax with Drain plug) Material Column
• 3" Viton Rubber Gasket
• FITOK Female Cross - 4 Port 1/4" (F) NPT
• Stainless Steel Pressure Gauge Vacuum - 200 psi Glycerine filled Centre Back Mount
• Nai-lok Black Nylon Valve, lever 1/4" Female NPT
• FITOK Hex Nipple - 1/4" x 1/4" (M)-NPT