x Lumatek Digital Dimmable HPS & MH Ballast - 600W | 400V
The Lumatek Ultimate Pro 600 has been specifically designed to help the hobby-grower access the benefits of using electronics to control and power both 240V MH/HPS and professional 400Volt HPS horticultural lamps. The Lumatek Ultimate Pro automatically detects the lamp connected and then powers that light. A Lumatek 600w 400V Lamp is supplied with the ballast. The 400V lamps are superior to the 240V lamps traditionally used in the hobby hydroponics and indoor garden markets due to their increased efficiency and greater PAR spectrum output. Photosynthetic Active Radiation (PAR) refers to the part of the light spectrum that plants actually use to photosynthesize and make energy to grow.
Using microprocessor and software controlled electronics, the Lumatek Ultimate 600 is an ultra-high frequency ballast operating at 120KHz (120,000 cycles per second) for 400V and 90KHz for 240V lamps. A conventional magnetic ballast operates at 50Hz, making much less light available to the plant. You can see the difference in quality of light yourself using the video camera on your phone, try filming a light powered by a magnetic ballast (strobe flicker) and then the Lumatek (solid light). This increased efficiency means less power is lost from the power supply to the lamp. The high frequency output results in low power loss at the cathodes in addition to better overall power management and energy efficiency.
The Lumatek Ultimate 600 is a remote electronic ballast that will plug into standard 240V mains supply and power 600W 400V HPS and 400W/600W 240V MH/HPS grow lamps. This ballast has an IEC connector on the lamp cable and can connect to any regular reflector. It can be easily integrate into your existing grow room; simply replace your ballast with the Lumatek Ultimate 600 and it will automatically detect which type of lamp you are using and provide precise voltage required for optimum PAR spectrum output. If you are powering a 600W 400V grow lamp, you will instantly achieve more useable grow light! More light = more yield!
 x Lumatek High Pressure Sodium (HPS) Lamp - 6000W | 400V
This 400V pulse-start lamp has been engineered for use with Lumatek Ultimate Pro 600W 400V electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
400V HPS lamps are more efficient than standard HPS lamps and this allows them to have a 10% increase in light intensity and PAR/PPF output.
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.
- Bulb: T46
- Lamp Power (W): 600W
- Power Voltage (V): 240V 50Hz
- Lamp Current (A): 3.6A
- Rated Hours: 24,000
- CCT (K): 2000
- Luminous Flux (lm): 90,000
- PAR (micromol/sec): 1100
- CRI: 20
- Base Designation: E40
 x Sea Hawk Ultra Lite HID Reflector - Small / Medium / Large / White Medium / White Large
- quality hammer-tone deluxe finish
- multi-fold reflector for even, direct light distribution
- extremely lightweight construction
- easy mounting
- comes fully assembled, including a quality lamp holder
- Silver | Small: 480 x 400MM
- Silver | Medium: 470 x 470MM
- Silver | Large: 650 x 550MM
- White | Medium: 480MM x 550MM]
- White | Large: 650MM x 550MM
-  x Lumatek Digital Ballast - 600W | 400V
-  x Lumatek High Pressure Sodium (HPS) Lamp - 600W | 400V
-  x Sea Hawk Ultra Lite HID Reflector - Silver Small / Silver Medium / Silver Large / White Medium / White Large
-  x Pair of Rope Ratchet (Hanger) - 68KG Capacity
|Barcode #||Does not apply|
|Unit Of Measure||ea|