Lumatek 630W CMH Lamp + Lumatek 630W CMH Ballast + Sea Hawk Reflector [Reflector: Silver | [Size: Large - 650MM x 550MM]]

Lumatek Digital Control CMH Ballast - 630W | Dimmable | 3 Years Aus Warranty

Lumatek presents the 630W Controllable & Dimmable CMH Ballast. This reliable digital ballast has been successfully used in cultivation facilities around the world and uses high-frequency technology to efficiently fire and operate 630W Double-Ended (DE) Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.

CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high-quality produce and essential oil extraction.

This ballast is for use with Lumatek 630W DE CMH lamp (4200K Daylight and 3100K Agro available). For safety, this ballast uses full circuit protection including open/short circuit, over-temperature, over/low voltage, end of lamp life/rectification and EMI suppression. The new addition of Control capability allows you to easily monitor and regulate your grow room environment (Lighting timming, sunrise/sunset, digital 1% dimming, etc). By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.

More Light – Less Heat – Full Spectrum – More Yield

Specifications

• Electronic ballast for 630W DE CMH lamps
• Voltage: 240V 50/60Hz
• Input Current Max (A): 3.2A
• Input power: 668W
• Output power: 630W
• Power factor: >0.97
• Efficiency: 95%
• Voltage range: 185 to 275V
• THD: <10%
• Dimming: 80% - 90% - 100%
• CF: <1.7
• Operating frequency: high frequency
• No audible noise, no flicker
• Environment temperature for full load operation: 40℃
• Enclosure temperature rise (Δt): ) 30℃
• Ballast IP rated: IP20
• Humidity: 90%
• Full circuit protection; open/short, over-temperature, over/low voltage, end of lamp life/rectification
• EMI suppression certified
• Dimensions: 320 x 114 x 81mm
• Weight: 3.8 Kg

Lumatek Ceramic Metal Halide (CMH) Lamp - 630W | DE | Borosilicate Glass

This Double-Ended (DE) high-frequency pulse-start lamp has been engineered for use with Lumatek 630W DE CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.

CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high-quality produce and essential oil extraction. Lumatek 630W Double-Ended (DE) Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps are available in 4200K Daylight and 3100K Agro CCT formats.

Double-ended CMH lamps are more stable than traditional, single-ended Metal Halide (MH) lamps and this allows them to have an increase in light intensity and PAR/PPF output of up to 50% compared with similarly powered standard MH lamps.

The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start-up & restrike time, longer lamp life and increased lumen maintenance.

Specifications:

• Power Voltage: 240V 50Hz
• Lamp Power (W): 630
• Lamp Current (A): 3.2
• Rated Life (H): 12000
• CCT(K): 3100K (Agro) or 4200K (Daylight)
• CRI (%): > 94%
• Luminous Flux (lm): 70000 (3100K) & 72000 (4200K)
• Luminous Efficiency (lm/W): 112 (3100K); 115 (4200K)
• PAR (umol/sec): 1250 (3100K) & 1200 (4200K)
• Bulb: T32.5
• Base: K12x30s (Double Ended)
• Double jacketed explosion-proof rated for open reflector

Adjust-A-Wings Reflector - Avenger Medium / Avenger Large / Defender Medium / Defender Large

Adjust-A-Wings were designed and built with one task in mind: to provide the best quality, most uniform, canopy-penetrating and plant-friendly light for grow rooms and climate rooms. Unlike some ‘deep-dish’ lighting fixtures which were born in the greenhouse world to supplement sunlight during winter, Adjust-a-Wings are especially horticultural lighting solutions where they are the sole light source.

The Adjust-A-Wings double-parabolic reflector was invented by lighting specialist and plant guru, Mr Paul Cronk BSc, in Australia in 1995. Back then, indoor gardening was still in its infancy and the reflectors available at the time were inefficient, angular and crude. Paul’s major brainwave was the ‘double-parabolic’ shape which both dissipates heat from the lamp and produces a beautiful, mathematically uniform light distribution over the plant canopy.

The Adjust a Wings reflector has the advantage that can be placed very close to the plants, increasing efficiency without limiting the area of ​​action. The Adjusts to Wings reflectors is assembled with the highest quality materials, including flexible aluminium coated fibreglass (95% reflection). Removing the "Hot Spot" allows you to considerably lower the reflector towards the plants, having incredible results!