BlueLab Grower's Toolbox - (pH Pen + EC Pen + Probe Care Kit)

#SKU: PHMTR30110
Brand:
$259.95
RRP $349.90
SAVE $89.95 (26%)


Calculate Shipping


Description

 

Genuine BlueLab Digital pH & Temperature Portable Pen

Plants get their nutrient from minerals but they can only get all the right minerals they need if certain conditions are right. Think of nutrients like a lock. pH is the key. A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH.

The Bluelab pH Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 - 22 C or 65 - 72 F is recommended.

The hand held pH pen provides a compact quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients.

Teamed with our Bluelab ppm or EC Pen, you have a handy, convenient and accurate system for ensuring optimum plant growth and health.

Now isn't that Handy!

 
pH Temperature

Measurement range:

0.0 – 14.0 pH 0 – 50 °C,
32 - 122 °F
Resolution: 0.1 pH 1 °C,
1 °F

Accuracy at 25 °C / 77 °F:

±0.1 pH ±1 °C,
±2 °F
 
Calibration: Two point (pH 7.0 and pH 4.0 or pH 10.0)
Automatic Temperature Compensation: Yes
Operating environment: 0 - 50°C, 32 - 122°F
Power source: 1 x AAA alkaline battery

 

Genuine BlueLab Digital EC PPM Portable Pen

The ultimate handy solution for measuring conductivity (EC or ppm) and temperature!

The Bluelab EC or ppm Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. To feed plants well, we need to know what we're feeding them. Start with a quality nutrient.

Measuring the conductivity every day is the best way to avoid over-diluting or over-concentrating your nutrient solution. Completely change the reservoir solution every 7 days. Top up the nutrient level between changes - so your plants always have the right amount of food.

The Bluelab EC or ppm Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 - 22 C or 65 - 72 F is recommended.

To make sure the plants can get at the food, you need to measure the pH of the solution. Check out our handy Bluelab pH Pen so you have every tool required to manage your nutrient solution.

Now isn't that Handy!

 
EC / ppm Temperature

Measurement range:

0.0 – 10.0 EC,
0 – 5000 ppm (500 ppm / TDS),
0 – 7000 ppm (700 ppm)

0 – 50 °C, 32 - 122 °F
Resolution: 0.1 EC, 10 ppm (500 ppm),
10 ppm (700 ppm)
1 °C, 1 °F

Accuracy at 25 °C / 77 °F:

±0.1 EC, ±50 ppm (500 ppm),
±70 ppm (700 ppm)
±1 °C, ±2 °F
 
Calibration: Optional
Automatic Temperature Compensation: Yes
Operating environment: 0 - 50°C, 32 - 122°F
Power source: 1 x AAA alkaline battery

 

Bluelab Probe Care Kit / pH & Conductivity Probe Care 2.77EC pH7.0 & 4.0

Everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm/EC) probes.

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.

Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it s dirty you can t see out! If the probe face is dirty, it cannot read the solution or soil accurately.

A tip if the conductivity reads low, the probe needs cleaning. pH probes specifically, should be kept wet at all times for optimal performance and life.

Follow a few easy steps for longer probe life and greater accuracy:

  1. Rinse the probe tip in fresh tap water between readings and after use.
  2. Keep the pH probe tip wet by placing the storage cap on the probe when not in use. If it dries, it dies.
  3. The pH probe is a glass instrument, handle it with care.
  4. Ensure the shroud stays on the conductivity probe at all times, except when cleaning.

Every 30 days, remember these simple steps:

  1. CLEAN - the probe tip
  2. HYDRATE - the pH probe in KCI storage soultion
  3. CALIBRATE - the pH probe to two pH points: pH 7.0 and pH 4.0.
  4. TEST - the conductivity probe in 2.77 EC solutions.
  5. STORE - the pH probe in KCI storage solution.

  



  • [1] x BlueLab Digital pH & Temperature Portable Pen
  • [1] x BlueLab Digital EC PPM & Temperature Portable Pen
  • [1] x Probe Care Kit / pH & Conductivity Probe Care 2.77EC pH7.0 & 4.0

SKU PHMTR30110
Barcode # 9421024920616
Brand Bluelab
Shipping Weight 0.5000kg
Shipping Width 0.200m
Shipping Height 0.050m
Shipping Length 0.100m
Shipping Cubic 0.001000m3
Unit Of Measure ea

We Also Recommend



Others Also Bought



More From This Category