SMSCom Hybrid Controller - 4A | Twin Fan Speed Controller | No Humming

#SKU: CNT1101
Brand: SMSCOM
$469.95
RRP $479.95
SAVE $10.00 (2%)


Calculate Shipping


Description

 

The Hybrid Controller uses software controlled temperature sensing technology combined with a mechanical system for controlling fan speed. It is designed to maintain a constant temperature inside your room whilst keeping airflow under control at all times.

It is the ideal solution for those looking for the quietest running extractor fans as it creates No Buzzing or Humming from any type of extractor GUARANTEED!!!! 

Once you have set your desired temperature level and minimum fan speed, the Hybrid Controller will automatically create the perfect climate by automatically adjusting the fans speed over a series of up to 5 steps (2 steps for the 2 ampere controller). Negative air pressure is ensured through the perfect synchronization of both fans.

The Hybrid Controller is plug and play, so no wiring is needed. Just plug in your fans, set the desired temperature and minimum fan speed, and the Hybrid Controller will take care of the rest. 

  

Features

 

  • Completely silent fan speed operation
  • Highly accurate temperature control
  • Light sensor equipped
  • Controls dark period humidity
  • 5 Step fan speed control
  • Regulates the optput of your intake and extractor fans (up to 900w)

 

 



  • Completely silent fan speed operation
  • Highly accurate temperature control
  • Light sensor equipped
  • Controls dark period humidity
  • 5 Step fan speed control
  • Regulates the optput of your intake and extractor fans (up to 900w)
  • [1] x SMSCom Hybrid Controller Pro 4A

Setting the Hybrid Controller

Automatic Setting:

The 4 ampere regulator will automatically choose between 5 different speed settings to maintain your set temperature.

  1. Position the controller in a convenient location and put the Temperature Sensor in the centre of the growing area. Avoid putting the Temperature Sensor somewhere where it will take a false temperature reading like in direct sunlight or in the cool incoming air from the ventilation system.
  2. Connect the input fan to the left side and the output fan to the right side of the controller.
  3. Plug the controller into an electrical socket and switch on.
  4. Set the desired temperature using dial 1.
  5. Set the minimum fan speed
  6. The 4, 8 and 16 ampere controller will now automatically adjust the fans speed between speed 1 and 5. The 2 ampere controller will automatically choose the high or low speed, depending on the ambient temperature.

Manual Setting for the 4 amp

Adjust the fans speed manually between speeds 1-5.

  1. Set dial 1 to its highest setting (45 degrees).
  2. Using dial 2, you can now adjust the speed manually between speeds 1 – 5.  Manual setting can only be used if the ambient temperature of the room is 45 degrees C or below.

In operation:

The Hybrid Controller uses a heavy duty relay to regulate the power as the controller switches between the different speeds. You will hear a small ‘click’ as the relay switches between speeds. The heavy duty relay ensures the controller is robust and reliable in operation at all times.

Minimum Fan Speed**only applies to the 4, 8 and 16 ampere controllers. When you set the minimum fan speed on a Hybrid Controller in the automatic mode, you are setting the range the controller can operate between. You are not turning the fans to that speed immediately For example, if set at speed 1, the controller will automatically adjust the fans speed anywhere between speed 1 and 5 to keep the temperature constant.  If set at speed 2, the controller will operate anywhere between speed 2 and 5 and so on… We recommend setting the minimum fan speed to the lowest setting, position 1, as this gives the greatest range of operation for the controller.

Max Load**: Hybrid Controller 4A: 4A or 900W

**Total maximum wattage that can be taken from the whole devise. Either split between or from a single socket.

SKU CNT1101
Barcode # Does not apply
Brand SMSCOM
Shipping Weight 2.0000kg
Shipping Width 0.300m
Shipping Height 0.100m
Shipping Length 0.200m
Shipping Cubic 0.006000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Hydro Experts users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



Others Also Bought



More From This Category